Composite material design of two-dimensional structures using the homogenization design method

Composite materials of two-dimensional structures are designed using the homogenization design method. The composite material is made of two or three di erent material phases. Designing the composite material consists of nding a distribution of material phases that minimizes the mean compliance of the macrostructure subject to volume fraction constraints of the constituent phases, within a unit cell of periodic microstructures. At the start of the computational solution, the material distribution of the microstructure is represented as a pure mixture of the constituent phases. As the iteration procedure unfolds, the component phases sepa- rate themselves out to form distinctive interfaces. The e ective material properties of the arti cially mixed materials are de ned by the interpolation of the constituents. The optimization problem is solved using the sequential linear programming method. Both the macrostructure and the microstructures are analysed using the nite element method in each iteration step. Several examples of optimal topology design of composite material are presented to demonstrate the validity of the present numerical algorithm