Development of the DYNA3D simulation code with automated fracture procedure for brick elements

Numerical simulation of cracked structures is an important aspect in structural safety assessment. In recent years, there has been an increasing rate of development of numerical codes for modelling fracture procedure. The subject of this investigation is implementing automated fracture models in the DYNA3D non-linear explicit nite element code to simulate pseudo 3D crack growth procedure. The implemented models have the capabilities of simulating automatic crack propagation without user intervention. The implementation is carried on solid elements. The methodology of implementing fracture models is described. An element deletion-and-replacement remeshing procedure is proposed for updating the explicit geometric description of evolving cracks. Fracture parameters such as stress intensity factors, energy release rates and crack tip opening angle are evaluated. The maximum circumferential stress criterion is used to predict the direction of crack advancement. Seven crack problems are presented to verify the e ectiveness of the methodology. Mesh sensitivity and loading rate e ects are studied in the validation of the presented procedure