Thermal Diffusivity of the Aluminum Alloy Al–17Si–4Cu (A390) in the Solid and Liquid States

The thermal diffusivity of the aluminum alloy Al–17Si–4Cu (A390) was measured in the temperature range from room temperature to 730◦C using the laser-flash technique. A commercial laser-flash system (Netzsch LFA 427) was used for the measurements. A short laser pulse of 300μs was applied to heat the bottom surface of a disk-shaped specimen, resulting in a timedependent temperature increase at the top surface. A correction for the laser pulse length as well as the surface radiation and convection was applied in order to evaluate the half time value of the temperature increase. The thermal diffusivity was calculated from the specimen thickness and the half time value. A sapphire crucible was used to contain the specimen in the mushy region and in the liquid state. As the laser is fired from below at the bottom surface of the specimen, the thickness of the melt has to be small to avoid significant buoyancy. The thermal diffusivity of the alloy above the eutectic temperature and in the liquid is drastically lower than in the solid state of the alloy.