Production of electricity from the treatment of urban waste water using a microbial fuel cell

In this work, is studied the oxidation of the pollutants contained in an actual urban wastewater using a two-chamber microbial fuel cell (MFC). By using an anaerobic pre-treatment of the activated sludge of an urban wastewater treatment plant, the electricity generation in a MFC was obtained after a short acclimatization period of less than 10 days. The power density generated was found to depend mainly on the organic matter contain (COD) but not on the wastewater flow-rate. Maximum power densities of 25 mW m−2 (at a cell potential of 0.23 V) were obtained. The rate of consumption of oxygen in the cathodic chamber was very low. As the oxygen reduction is coupled with the COD oxidation in the anodic chamber, the COD removed by the electricity-generating process is very small. Thus, taking into account the oxygen consumption, it was concluded that only 0.25% of the removed COD was used for the electricity-generation processes. The remaining COD should be removed by anaerobic processes. The presence of oxygen in the anodic chamber leads to a deterioration of the MFC performance. This deterioration of the MFC process occurs rapidly after the appearance of non-negligible concentrations of oxygen. Hence, to assure a good performance of this type of MFC, the growth of algae should be avoided.