Proton conduction in Nafion composite membranes filled with mesoporous silica

Studies of proton-conductive polymer membranes are vital for the future development of high-performance polymer electrolyte membrane fuel cells (PEM-FC). In particular, a method for inhibiting the volatility of water in the polymer matrix at high temperatures is a crucial issue, directly related to the operation of PEM-FC system. In this study, we focus on polymer composite membranes, which consist of commercial Nafion and mesoporous silica (MPSi) as novel inorganic additives, and investigate an improvement in the total proton conductivities and the good electrochemical stability at high temperatures. MPSi, which can be synthesized with pore sizes from 1 to 10 nm, has a wide range of potential applications because of its extraordinary properties, such as extremely large surface area, flawless surface condition and well-regulated porous structure. We found that the Nafion composites filled with MPSi have approximately 1.5 times higher proton conductivities (more than 0.1 S cm−1 at 80 °C and 95%RH) than pure Nafion and can display good temperature performance relative to pure Nafion and the particle SiO2 composite. Moreover, the conductivity of Nafion/sulfonated MPSi was the highest (0.094 S cm−1) at 40 °C and 95%RH. These are probably due to the large surface area of MPSi, which can increase the water adsorption in Nafion matrix.