Damage Identification Using Committee of Neural Networks

This paper presents a committee of neural networks technique, which employs frequency response functions (FRFs), modal properties (natural frequencies and mode shapes), and wavelet transform (WT) data simultaneously to identify damage in structures. The experimental demonstration of the method is obtained by studying the sensitivities of the FRFs, modal properties, and WT data to four types of faults in a cylindrical shell. The experimental results show that different faults affect data in a different manner. The proposed approach is tested on simulated data from a threedegree-of-freedom mass-spring-damper system. The results from the simulated study show that the performance of the approach is not influenced by the noise in the data. Finally, the method is used to identify damage in a population of ten steel seam-welded cylindrical shells. The proposed method is able to identify damage cases better than the three approaches used individually. The committee approach gives results that generally have a lower mean square error (MSE) than the average MSE of the individual methods. It is found that the effectiveness of the method is enhanced when experimentally measured data are used, which is in contrast to many existing methods. This is because the committee approach assumes that the errors given by the three approaches are uncorrelated, a situation that becomes more apparent when using measured data rather than simulated data.