Anelastic effects connected with isothermal martensitic transformations in 24Ni4Mo austenitic and 12Cr9Ni4Mo maraging steels

Strain aging was studied in an ultra low carbon (ULC) steel with a total carbon content of 20 ppm (wt.%) in order to identify the process stages and mechanism of bake hardening in this type of steel. The effects of dislocation density, varied by means of uniaxial tensile prestraining (1-10%) on the aging kinetics were investigated within an aging temperature range of 50-170°C. The aging was evaluated by means of strength measurements and the determination of interstitial carbon content after aging using a piezoelectric composite oscillator operating at 40 kHz. The interaction between interstitial carbon and dislocations was examined through amplitude dependent internal friction measurements. The influence of dislocation density on the aging behavior have been discussed with reference to the kinetics and mechanism of the aging process.