Author/Authors :
فاتح، امير نويسنده Department of Civil Engineering, Faculty of Engineering, University Putra Malaysia (UPM), 43400 Serdang, Selangor Darul Ehsan, Malaysia Fateh, Amir , حجازي، فرزاد نويسنده , , ذبيحي، عليرضا نويسنده Zabihi, alireza , بهنيا، آرش نويسنده Department of Civil Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia Behnia, Arash
Abstract :
An experimental investigation done on the RC exterior wide beam-column joint when subjected to the gravity load up to failure is reported in this paper. This study was conducted by applying the concentrated gravity load on full scaled wide beam-column joints with same area of longitudinal reinforcement to resist for negative moment due to concentrated gravity load. The joints behavior was considered by effect of different layout of beam longitudinal bars, existence of the shear link in connection zone, spandrel bar and width of the beam in terms of failure capacity, crack patterns, deflection and rotation. The results shown that the failure capacity of joints with concentrated longitudinal bars of beam that two-third of bars anchored in the column zone was 24 % higher than even bar distribution. And also the existence of the shear links in connection area and spandrel bar to anchor the longitudinal beam reinforcements that were outside the connection area is higher than the other specimens without them. Moreover, the width of beam played important role to enhance the failure capacity.
