Numerical modeling of oxygen exclusion experiments of anaerobic bioventing

A numerical and experimental study of transport phenomena underlying anaerobic bioventing (ABV) is presented. Understanding oxygen exclusion patterns in vadose zone environments is important in designing an ABV process for bioremediation of soil contaminated with chlorinated solvents. In particular, the establishment of an anaerobic zone of influence by nitrogen injection in the vadose zone is investigated. Oxygen exclusion experiments are performed in a pilot scale flow cell (2×1.1×0.1 m) using different venting flows and two different outflow boundary conditions (open and partially covered). Injection gas velocities are varied from 0.25×10−3 to 1.0×10−3 cm/s and are correlated with the ABV radius of influence. Numerical simulations are used to predict the collected experimental data. In general, reasonable agreement is found between observed and predicted oxygen concentrations. Use of impervious covers can significantly reduce the volume of forcing gas used, where an increase in oxygen exclusion efficiency is consistent with a decrease in the outflow area above the injection well.