Control of metal toxicity, effluent COD and regeneration of gel beads by immobilized sulfate-reducing bacteria

Over the last few decades, the use of sulfate-reducing bacteria (SRB) in the treatment of heavy-metal containing wastewaters including acid mine drainage has become a topic of scientific and commercial interest. However, technical difficulties such as the sensitivity of SRB to toxic metals and high effluent COD limit the widespread use of SRB in high heavy-metal containing wastewater. The aim of this study was to clarify the reasons why the immobilized SRB sludge with inner cohesive carbon source (ISIS) process can endure high metal toxicity and decrease effluent COD. The ISIS process can physically set apart SRB and free the system of external influences such as the surrounding toxic metallic ions, as well as form inner carbon sources to avoid high effluent COD. Metal toxicity and bead durability are the two major factors which influence the regeneration and reuse of gel beads. Reuse of suspended SRB sludge and beads crosslinked with boric acid were unsuccessful due to metal toxicity and agglomeration of beads, respectively. However, beads crosslinked with ammonium sulfate prevented agglomeration of beads allowing successful bead regeneration and reuse. The result of four cyclic trials showed that over 99% of zinc was removed in each trial using these beads.