Application and test of a simple tool for operational footprint evaluations

We present a user-friendly tool for footprint calculations of flux measurements in the surface layer. The calculations are based on the analytical footprint model by Kormann, R. and Meixner, F.X. [2001. An analytical footprint model for Non-neutral Stratification. Boundary-Layer Meteorology 99, 207–224]. The footprint density function of a flux sensor is determined using readily available data from standard eddy covariance measurements. This footprint density function is integrated over defined surface areas given as quadrangular polygons representing e.g. agricultural fields. We illustrate the use and performance of the tool by applying it to CO2 flux measurements with three eddy covariance system at the Swiss CarboEurope grassland site. Two flux towers were positioned in the centre of two neighbouring fields, respectively, that showed a very different CO2 flux during the study period. The third tower was located near the border of the two fields and was frequently influenced by both fields to a similar degree. The calculated footprint fractions were used to simulate the latter flux from the other two systems. The measured and simulated fluxes showed a good agreement and thus support the reliability of the footprint calculation. The presented simple footprint tool can be used as a routine quality check for flux monitoring stations influenced by surface areas with varying vegetation covers and/or land-use.