Phosphorus quantity–intensity relationships and agronomic measures of P in surface layers of soil from a long-term slurry experiment

Soils from a long-term slurry experiment established in 1970 at Hillsborough, Northern Ireland, were used in the experiment. The site has a clay loam soil overlying Silurian shale. Seven treatments were used with three replicate plots per treatment. Control plots were treated with mineral fertiliser supplying 200 kg N, 32 kg P and 160 kg K ha−1 yr−1. Slurry treatment plots were in two blocks and treated with either pig or cow slurry supplied at 50, 100 or 200 m3 ha−1 yr−1. Agronomic measures of P determined on 10-cm soil cores were compared with measured P quantity/intensity (Q/I) parameters from fitted sorption and desorption isotherms. Phosphorus affinity constant was found to be significantly and negatively correlated with P loading of soils. Desorption rate coefficient also increased significantly with increase in P loading from slurry, although there was no significant difference between slurry types (cow vs. pig). In contrast, while agronomic measures of P (water-soluble P, Olsen P, calcium chloride-extractable P, degree of P saturation (DPS)) also correlated significantly with P loading and total P (TP) in the soils, there was a separation and significant differences between the cow and pig slurry treatment blocks, with the former being much lower. Phosphorus inputs to pig slurry treated plots were much higher than to equivalent cow slurry plots over the first 15 years of the study but declined sharply over the most recent 10 years to more or less par. Conventional measures of agronomic P such as Olsen P and DPS, measure only P accumulation over the longer term and indicated only the higher content of P accumulating in soil of pig slurry treatments. Risk of P loss estimated by Q/I parameters appeared to show very similar behaviour between the two slurry types in line with more recent manurial additions but in contradiction of P accumulation statistics.