Impacts of COD and DCP loading rates on biological treatment of 2,4-dichlorophenol (DCP) containing wastewater in a perforated tubes biofilm reactor

Biofilm processes offer considerable advantages for biological treatment of chlorophenol containing wastewaters since such industrial effluents are difficult to treat by conventional activated sludge processes. A rotating perforated tubes biofilm reactor (RTBR) was developed and used for treatment of 2,4-dichlorophenol (DCP) containing synthetic wastewater. Effects of COD and DCP loading rates on COD, DCP and toxicity removals were investigated. Percent COD removal decreased and effluent COD increased with increasing COD and DCP loading rates due to toxic effects of high DCP content in the feed. DCP and toxicity removals showed similar trends. As the DCP loading rate increased the effluent DCP content increased yielding high toxicity levels in the effluent. COD and DCP loading rates should be below 90 g COD m−2 d−1 and 2.8 g DCP m−2 d−1 in order to obtain more than 90% DCP and toxicity removals. However, DCP loading rates lower than 1 g DCP m−2 d−1 are required to obtain more than 90% COD removal. Empirical equations were developed to estimate percent COD, DCP and toxicity removals as functions of COD and DCP loading rates. The coefficients of the empirical equations were determined by using the experimental data. Empirical model predictions for percent COD, DCP and toxicity removals were in good agreement with the experimental data.