Metal corrosion and argillite transformation at the water-saturated, high-temperature iron–clay interface: A microscopic-scale study

In this study, microscopic and spectroscopic techniques (scanning electron microscopy coupled with energy-dispersive X-ray analysis, Raman microspectroscopy, micro X-ray fluorescence spectroscopy, micro X-ray fine structure adsorption spectroscopy, and micro laser-induced breakdown spectroscopy) were combined to decipher the chemical and mineralogical properties of a saturated Fe–clay interface reacted at 90 °C and 50 bar for 8 months. The results collectively confirm the presence of a corrosion layer and a clay transformation layer. The corrosion layer is made of a magnetite-containing internal sublayer and a Fe-phyllosilicate external sublayer enriched in Na, with traces of goethite presumably resulting from sample reaction with air. The clay transformation layer is made of predominantly Ca-rich siderite (FeCO3). It is depleted in Al and K, suggesting dissolution of rock-forming minerals. The corroded thickness determined from the amount of Fe in corrosion and transformation layers and assuming zero porosity equals 19 ± 9 μm. These data indicate that the interfacial clay was transformed by dissolution of calcite and clay minerals and precipitation of siderite close to the original surface. Silica released upon clay dissolution diffused into the corrosion layer and coprecipitated with oxidized Fe to form Fe-phyllosilicate.