A material and energy flow model for co-production of heat and power

Co-production of electricity, district heat and industrial heat/process steam (heat and power, CHP) has been applied to a large, national scale, in only a few countries in the world, Denmark, The Netherlands and Finland. In this production method, the waste energy from electricity production is used in two quality levels. First, industrial process steam requirements can be met with this residual energy. Second, the waste energy is used in local district heating networks for households and other buildings in a city. In this integrated production method, a total fuel efficiency of 85% can be achieved. Through the technique of fluidized bed combustion, modern CHP plants can use coal and oil, and in addition, heterogeneous fuels such as biomass, industrial wastes and recycled fuels from households. In this paper, the CHP method is considered in terms of four categories of material and energy flows. For the purpose of considering the potential environmental gains and the difficulties of this production method when applied to integrated waste management and energy production, the four suggested categories are: matter (biomass) (1), nutrients (2), energy (3) and carbon (4). Corporate environmental management inventory tools, decision-making tools, management, organisational and administrative tools as well as information management tools that could be used in CHP-related material and energy flow management are shortly discussed. It is argued that for CHP energy and environmental management, it can be important to adopt an approach to networks of firms, rather than to an individual firm. The presented material and energy flow model may contribute to assessing, planning and implementing of CHP-based waste management and cleaner energy production.