Contribution of particle counting in assessment of exposure to airborne microorganisms

The aim of the study was to determine the relationship between airborne bacterial concentrations and particle counts measured simultaneously at different sites. Andersen single stage viable particle samplers were used for microbial measurements while a Laser particle counter gave the cumulated counts of particles larger than 0.5 μm diameter. The first phase of the study was performed in two experimental rooms where the basic level of microbial contamination was low. Peaks of concentrations were generated by human activity and both bacterial and particle counts were monitored over 1 h. In the second phase, measurements were run for several days in three different buildings normally occupied. Natural variations of bacterial and particle counts were monitored: microbial measurements were performed each hour while particle counts were started with a 10 min frequency. Statistics revealed strong positive correlations between bacterial and particle counts in four sites out of five. Analyses of covariance used to compare the regression lines obtained in each area showed that except for two natural sites, the regression lines were significantly different, indicating that no absolute relationship can be established between the two parameters. Therefore, particle counting should, of course, not take the place of microorganism measurements, but combining particle counting with bioaerosols measurements may allow detection of rapid variations instantaneously and indicate further microbial measurements. This strategy should improve the assessment of people“s real exposure to airborne microorganisms