Collection and analysis of organic acids in exhaust gas. Comparison of different methods

This paper reports the development of a specific method to identify organic acids in exhaust gases. The organic acids are collected in two impingers containing liquids (pure water or Na2CO3 1% aqueous solution) and four cartridges containing solids (silica, fluorisil, alumina B and alumina N). Once collected, the acids are eluted of the solids by a hot water stream. These traps performances, in terms of organic acids collection and elution efficiency, are evaluated and compared. Two sources are used to produce the gas flow containing organic acids: one generates a flow whose concentration is known and stable, the other produces organic acids among other combustion products. For eluted solutions analysis, two methods are used: isocratic ionic chromatography/conductivity detection and GC/FID. Their efficiency in separating 10 aliphatic acids are compared. Their characteristics such as detection limits, detection linearity, repeatability and possible interferences with other components found in exhaust gases are determined. The stability of the organic acids solutions is also studied. Lastly, the use of these methods is illustrated by the analysis of the gas-phase organic acids exhausted by a spark ignition and by a diesel engine.