A technical review of the feasibility of producing certified reference materials for the measurement of gaseous pollutants in ambient air

Within the frame of the EU sponsored project ‘Cermatair’ (Certified Reference Materials for the Measurement of Gaseous Pollutants in Ambient Air, contract G6RD-CT-2001-00517) the feasibility of preparing and certifying reference materials for the measurement of sulphur dioxide, nitrogen dioxide, carbon monoxide and benzene in ambient air was studied. The project focused on measurements at concentration levels corresponding to limit values given in EU Ambient Air Quality Directives and covered reference materials for the reference methods specified in these Directives and for alternative methods based on diffusive sampling. State-of-the-art technologies for the production and certification of the reference materials were identified through literature surveys. Limited batches of reference materials were prepared and, wherever appropriate, tested for homogeneity. The reference materials were subsequently tested in small-scale external verifications, performed by 2–4 laboratories other than the preparation laboratory, aimed at identifying possible discrepancies between concentration values from the preparation processes and experimental values. The results of these verifications revealed possible mechanisms of certification (based on preparation or measurements). The remaining materials were subjected to a one-year stability study.