The influence of physical and chemical factors on the transport of E. coli through biological filters for wastewater purification

Transport studies of Escherichia coli were performed in laboratory columns over a period of 15 months. The effects of the filter media properties, effective grain size, specific surface area, pH and cation exchange capacity were examined for loading rates of 25 mm and 50 mm/day applied as 8 doses per day. Distilled water and two solutions of ionic strength 0.00725 and 0.097 M were applied to the columns. Physical factors were found to be the most important for the removal of E. coli. Reduced grain size, hydraulic loading rate and increased specific surface area of the grains significantly reduced transport of E. coli. Chemical factors such as pH, cation exchange capacity and wastewater ionic strength showed less significant effects. The results indicate that the chemical factors in biological wastewater filters have a minor influence on the removal of E. coli after a stabilizing period of three months. Minimum hydraulic retention time (time required for 10% breakthrough of a conservative tracer) was found to be the most relevant parameter for predicting bacterial removal in unsaturated filter systems. Correlation between observed data and a first order removal model, based on minimum retention time, was 0.70.