Effects of impurities on oxygen transfer rates in diffused aeration systems

A series of unsteady-state reaeration tests were performed in a 500-L tank at 0.81–4.58 m3/h diffused-air flow rate and 288–302 K water temperature. Three different types of impurities: soybean oil, surfactant, and diatomaceous earth were doped to simulate the impurities in wastewaters and the effects of the impurities on the oxygen transfer rate were investigated. The ASCE and the two-zone oxygen mass-transfer models were used to analyze the unsteady-state reaeration data and the volumetric mass-transfer coefficients determined from the unsteady-state reaeration data were correlated as a function of the diffused-air flow rate, water temperature, and impurity concentration. The results showed that the alpha factors based on the ASCE model are less sensitive to the impurity concentration while the presence of the impurities significantly reduces the alpha factors in the gas bubble zone. The saturation DO concentration and volumetric oxygen mass-transfer rate can be predicted by the two-zone model along with the correlation obtained in this study.