A rapid method to measure the solid–water distribution coefficient (Kd) for pharmaceuticals and musk fragrances in sewage sludge

Pharmaceuticals and personal care products are omnipresent in wastewater world-wide. In order to predict their sorption quantities onto sludge in wastewater treatment plants (WWTPs), the solid–water distribution coefficients (Kd values) of selected pharmaceuticals (antiphlogistics, estrogens, lipid regulators, anti-epileptic and cytostatic agents) and polycyclic musk fragrances (HHCB, AHTN) were determined in primary and secondary sludges taken from a German municipal WWTP. For the Kd determination, batches of primary and secondary sludge slurries were spiked with the respective target compounds and slowly stirred under defined conditions (e.g. an argon atmosphere). Finally, the water and solid sludge phases were analysed. The Kd values of pharmaceuticals ranged from <1 to 500 L kg−1, while those for the polycyclic musk fragrances AHTN and HHCB proved to be up to 5300 and 4900 L kg−1, respectively. The primary and secondary sludge showed significant differences for some pharmaceuticals such as Diclofenac and Cyclophosphamide due to the different pH and composition of the two sludges. The removal rate from the water phase caused by sorption in a WWTP can be reasonably predicted on the basis of the Kd values.