Analysis and Simulation of a 1-18-GHz broadband double-ridged horn antenna

A 1-18-GHz broadband double-ridged horn antenna with coaxial input feed section is investigated. For the ridged horn antenna it is found that the radiation pattern, contrary to common belief, does not maintain a single main lobe in the direction of the horn axis over the full frequency range. Instead, at frequencies above 12 GHz, the main lobe in the radiation pattern starts to split into four large side lobes pointing in off-axis directions with a dip of up to 6 dB between them along the main axis. Although this type of horn is the preferred test antenna, which is in common use for over four decades, no explanation for this unwanted behavior was found in the open literature. To investigate this phenomenon in detail, a method of moments approach has been adopted to simulate the complete antenna system. The simulations are in good agreement with the measurements over the 1-18-GHz operational bandwidth and indicate that the use of this type of horn antenna in EMC applications remains questionable