Three-dimensional correction of the stress intensity factor for plate with a notch

The 3D effects of the 2D mode I stress intensity factor for the plate with a V-shaped straight through-thickness notch are investigated by the finite element method and three-dimensional thicknessdependent correction of SIF is suggested. The correction relies on the assumed relationship between the SIF and the constraint factor (out-of-plane degree of freedom). The 3D finite element mesh generator combining the 2D in-plane adaptive unstructured mesh with the structured through-thickness mesh Is developed and applied for the analysis purposes. Three-dimensionality was examined by using two independent indicators, namely, stress- or strain-based constraint factors. The three-point bend and tensile center-cracked plates are investigated. The results demonstrated that the developed 3D corrections may be treated as upper bound estimates of the SIF for three-point bend plate,while directly obtained numerical values are considered as lower bound estimates. Analysis of the tensile center-cracked plate demonstrated a different nature of the 3D SIF profile, which cannot be simply explained as a transitional state between plain strain and plain stress. Therefore, the suggested 3D correction concept is of a particular character.