SEM in-situ investigation on failure of nanometallic film/substrate structures under three-point bending loading

Three-point bending tests on nanocrystalline Cu or Cu/Ni-film/Cu-substrate samples were conducted in-situ with scanning electronmicroscopy (SEM) observations. The SEM in-situ observations show undulation deformation of the surface of thin film, as the thin film fractures easily at the concave-convex points of deformation and multi-cracks appear on the surface of the thin film in a periodic fashion. The critical wavelength of undulation is calculated based on experimental observations, which are comparable with the theoretical predictions. For the Cu/Ni multi-layered films/substrate structures, the micro-cracking pattern depends on the interfacial strength between the film and the substrate, rather than the interfacial strength between the layers of films