Failure identification in composite materials using Thermographics method

This research gives an overview of an investigation into existing non-destructive testing (NDT) methods used to analyse composite materials. From the investigation and subsequent experimentation a new technique of failure identification in composite materials was developed. The new technique is a form of thermography whereby a temperature rise in a composite material during failure is detected via a thermal camera and a thermal image captured. By observing the thermal images captured of the event the location and the severity of the failure could be gained by only using the thermal images combined with a visual inspection to validate the results. By taking a thermal image and analysing the constituent red, green and blue colours that make up the image, the location of the defect could be pinpointed. This analysis method was developed using MATLAB® in order for the location of a defect to be found using only a thermal image of the composite during failure. The analysis showed that the information that yields the most accurate location of failure was the red part of the images.