Improvement of impact toughness of the SA 508 class 3 steel for nuclear pressure vessel through steel-making and heat-treatment practices Original Research Article

Comparative investigations of the effects of steel-making practices on impact and fracture toughness were studied. From these examinations, impact and fracture toughness of the steels by vacuum carbon deoxidation (VCD) offered the required values; however, those of the steels by modified VCD and silicon-killing practices were secure. The fracture toughness (KIC) was significantly improved by the silicon-killing and the modified VCD. These resulted from the fineness of austenitic grain size and reduction of sulphidic inclusion. It was observed that the grain size of steels by modified VCD and silicon-killing practices was 20 μm, while that of steel by VCD was 50 μm. The sulphidic inclusion contents were reduced in the steels by modified VCD and silicon-killing practices. Furthermore, the effects of cooling rates from austenitizing temperature on the impact toughness in the steel by VCD were also investigated. The impact toughness of the steel by VCD was closely related to the cooling rate. To obtain the secure impact toughness in the steel by VCD, it seems that the recommended minimum cooling rate from the austenitizing temperature should be 15°C min−1.