Short circumferential through-wall cracked pipes subjected to stretch-bending load Original Research Article

The methods for assessment of elastic–plastic fracture behaviour of cracked components include the net section plastic collapse concept, the J-integral approach, and the two-parameter R-6 failure assessment diagram, Revision 3. These failure assessment methods are usually used to obtain fracture behaviour prediction with a reasonable degree of accuracy without carrying out complicated full-length numerical fracture analysis. In the current work, fracture experiments on stainless steel pipes with short circumferential through-wall cracks under stretch-bending load were conducted. Stretch-bending load refers to the loading situation where axial load is generated that is proportional or related to the applied bending load. The J-integral values derived from the experimental load-point load–displacement data under stretch-bending and pure bending conditions are compared to investigate the effect of axial load on the J–resistance curves. The results show clear dependence of crack resistance force on axial load for short circumferential cracks. Crack resistance force decreased noticeably for increased stretch-bending loading compared to pure bending loading.