Review of liquid metal corrosion issues for potential containment materials for liquid lead and lead–bismuth eutectic spallation targets as a neutron source Original Research Article

Lead (Pb) and lead–bismuth eutectic (44Pb–56Bi) have been the two primary candidate liquid metal target materials for the production of spallation neutrons. Selection of a container material for the liquid metal target will greatly affect the lifetime and safety of the target subsystem. For the liquid lead target, niobium–1 wt% zirconium (Nb–1Zr) is a candidate containment material for liquid lead, but its poor oxidation resistance has been a major concern. In this paper, the oxidation rate of Nb–1Zr was studied based on the calculations of thickness loss resulting from oxidation. According to these calculations, it appeared that uncoated Nb–1Zr may be used for a 1-year operation at 900°C at PO2=1×10–6 Torr, but the same material may not be used in argon with 5-ppm oxygen. Coating technologies to reduce the oxidation of Nb–1Zr are reviewed, as are other candidate refractory metals such as molybdenum, tantalum, and tungsten. For the liquid lead–bismuth eutectic target, three candidate containment materials are suggested, based on a literature survey of the materials’ compatibility and proton irradiation tests: Croloy 2-1/4, modified 9Cr–1Mo, and 12Cr–1Mo (HT-9) steel. These materials seem to be used only if the lead–bismuth is thoroughly deoxidized and treated with zirconium and magnesium.