A direct fracture toughness model for irradiated reactor vessel weld material based on reference temperature Original Research Article

The master curve method has opened a new means to acquire a directly measured material-specific fracture toughness curve based on testing a small number of replicate specimens. This process enables, for the first time, the construction of a material-specific fracture toughness curve for an irradiated material directly from fracture tests. Currently, only an inferred fracture model is available through a combination of the ASME Boiler and Pressure Vessel Code and a regulatory guide from the U.S. Nuclear Regulatory Commission. This approach uses the fracture toughness curve of a generic, unirradiated reactor vessel steel that is shifted by a reference temperature (RTNDT) based on Charpy impact test data. The master curve method yields a key material parameter called reference temperature, T0, which indicates the location of the transition range fracture toughness curve on the temperature axis. When a small number of pre-cracked Charpy specimens were tested at several different fluence levels, the material specific reference temperatures can be shown as a function of fluence. One such model for the WF-70 weld material is presented in this paper. The irradiated specimen data and analyses from Oak Ridge National Laboratory (ORNL) and the B&W Owners Group (B&WOG) are utilized for this model. This model is based on fracture toughness data, independent of Charpy impact energy levels, percent shear, and most importantly, material properties of unirradiated condition.