TRACE simulation of sodium boiling in pin bundle experiments under loss-of-flow conditions Original Research Article

In the framework of PSIʹs FAST code system, the thermal–hydraulic code TRACE is being extended for representation of sodium two-phase flow. As the currently available version (v.5) is limited to the simulation of only single-phase sodium flow, its applicability range is not enough to study the behavior of a Generation IV sodium-cooled fast reactor (SFR) during transients in which boiling is anticipated. The work reported here concerns the extension of the non-homogeneous, non-equilibrium two-fluid models, which are available in TRACE for steam-water, to sodium two-phase flow simulation. The conventional correlations for ordinary gas–liquid flows are used as basis, with optional correlations specific to liquid metal where necessary. A number of new models for representation of the constitutive equations specific to sodium, with a particular emphasis on the interfacial transfer mechanisms, have been implemented and compared with the original closure models.