Numerical and modeling issues in application of CFD to flow in a simplified plenum relevant to a prismatic VHTR Original Research Article

Computational Fluid Dynamics (CFD) calculations have been performed for turbulent flow inside a plenum model that resembles a section of the lower plenum of a typical helium-cooled prismatic Very High Temperature Reactor (VHTR). Different Reynolds Averaged Navier–Stokes (RANS) based turbulence models are employed to investigate the capability in capturing unsteady large scale coherent structures due to vortex shedding at two different Reynolds numbers. A grid convergence study is conducted with those models which were able to capture unsteady vortex shedding. The non-linear interaction of mesh quality, turbulence model and numerical scheme lead to flow regime changes with significantly different unsteady behaviors. This makes it difficult to assess numerical and modeling uncertainty using the procedures available in the literature. Some remedies to overcome this difficulty are recommended. The numerical uncertainty in the local values of velocity components at selected locations inside the plenum, as well as the uncertainty associated with derived quantities such as wall shear stress at critical locations are calculated and reported. Since there are no experiments corresponding to the present cases simulated, the current analysis can be considered as a blind application of the proposed uncertainty estimation procedures.