Master-slave intelligent robot telepresence system

In this paper, the analysis and design of master-slave intelligent robot telepresence system are discussed. When the operator acts on the master manipulator, the position and attitude information of the master manipulator are gathered by the computer. After calculating and coordinate transforming, the data are send to the computer of the slave manipulator. Then the slave manipulator-PUMA562 robot follows the master manipulatorʹs movement precisely. Six-dimension force/toque sensor(lord cell) is mounted on the slave manipulator. As the master manipulator and the toque on the slave manipulator are different in structure, the force and the slave manipulator should be send to the master manipulator computer and dissociated by the master manipulator computer. Proper ratio of the force on the master manipulator and the force on the slave manipulator is selected, and distribute to the master manipulator joints. So that the operator could feel the force from the master manipulator, which is obtained by the motors of the joints. The proposed control scheme is introduced to a prototype master-slave system and the experimental results show the validity of the proposed scheme.