Design of cellular manufacturing systems with assembly considerations

This research proposes incorporating assembly aspects associated with a product into the design of Cellular manufacturing System (CMS). The literature on CMS design implicitly assumes that finished part is the end product by itself. In practice, often, manufacturers produce parts which are assembled into a finished product. The methodology employs a part–subassembly matrix derived from the product structure in addition to the part–machine matrix. A mathematical programming model is developed which determines an assignment of parts, machines and subassemblies to manufacturing cells. The proposed model employs a new similarity coefficient between part, machine and subassembly. The model resulted in a nonlinear program with 0-1 variables. A case study has been analyzed based on a published part–machine matrix and a randomly generated product structure. The analysis reveals that it may be required to forego some of the efficiencies of Group Technology (GT) in order to achieve integration of assembly operations with production of parts. From a practical stand point of view it is preferred to have a system design which has a mix of GT and integration efficiencies, compared to a design which outperforms on GT criteria and completely lacks integration of assembly operations with production of parts.