Performance and optimum design analysis of an absorber plate fin using recto-trapezoidal profile

This paper establishes a new profile, viz. recto-trapezoidal (RT) of an absorber plate fin on the basis of ease of fabrication as well as augmentation of heat transfer rate per unit fin volume. An analytical model has been developed for evaluating the thermal performance and optimum dimensions of an absorber plate fin using this typical profile. The present study is equally suitable for an absorber plate fin having a rectangular, trapezoidal or triangular profile also with consideration of their respective geometrical parameters. The optimization of the RT profile has been cast in a generalized form either by maximizing heat transfer rate for a given fin volume or by minimizing fin volume for a given heat transfer duty. From the optimum design analysis, significant results have been noticed when an additional constraint is imposed with the fin volume. Under this design condition, it may also be highlighted that for an optimal circumstance, the heat transfer rate through a RT profile absorber plate fin is greater than a trapezoidal or triangular profile for the same fin volume. However, this observation may be restricted to the limited values of fin volume only. The optimum design analysis for the RT profiled absorber plate fin has also been studied under the different design constants. Finally, for the variation of all the design variables, optimum design curves have been generated for a wide range of thermo-geometric parameters. 2007 Elsevier Ltd. All rights reserved.