Author/Authors :
Haiting Cui a، نويسنده , , b، نويسنده , , *، نويسنده , , Yuming Xing b، نويسنده , , Yanshu Guo a، نويسنده , , Zhenhui Wang a، نويسنده , , Haochen Cui c، نويسنده , , Xiugan Yuan b، نويسنده ,
Abstract :
In this paper, numerical simulation and experimental investigation on unit heat exchange tube for solar heat receiver are reported.
Based on enthalpy method, a physical and numerical model of the unit heat exchange tube was developed. An experimental system
of solar simulator test rig was also set up with high temperature LiF–CaF2 eutectic mixture as the PCM and dry air as the working fluid.
The hardware, test procedures, and test results from these experiments are also discussed. The simulating orbit data was numerically
analyzed and compared with test data. Canister thermal performance can be predicted well by numerical canister analyses. The results
show that the output temperature of the gas of the working fluid tubes meets the expected demand during the sunlight and eclipse period
and the maximum temperature and average temperature of the PCM container were all under the safe range.
2008 Elsevier Ltd. All rights reserved
Keywords :
Thermal performance , Solar dynamic power , Heat receiver , Unit heat exchange tube
