Development and application of the PBMR fission product release calculation model Original Research Article

This paper provides a discussion of the model development status and verification efforts for the Reactor Core Thermal–Hydraulic model developed for the full-scope plant Operator Training Simulator System of the Pebble Bed Modular Reactor (PBMR). Due to the First of a Kind Engineering nature and lack of reference plant data, model verification has mainly been focused on benchmarking the model configurations against test cases performed by PBMR design analysis codes, i.e. TINTE, VSOP and FLOWNEX. As a first step, due to the symmetrical physical nature of the PBMR core, a two-dimensional (2D) model configuration in radial and axial directions (axial-symmetry) was developed. The design was subsequently extended to a three-dimensional (3D) configuration. Through the use of cross-flow and cross-conduction links, three nearly identical 2D configurations were glued together to form this 3D model configuration. To date, the 3D configuration represents the most comprehensive model to simulate the PBMR core thermo-hydraulics. This paper concludes with the verification of thermodynamic and heat-transfer properties of two steady state (100% and 40% power) conditions between the 3D Reactor Core Thermal–Hydraulic model and the available FLOWNEX and TINTE design code analysis. The transient operations between these two power levels are also discussed.