Modeling of bubble-layer thickness for formulation of one-dimensional interfacial area transport equation in subcooled boiling two-phase flow

In relation to the formulation of one-dimensional interfacial area transport equation in a subcooled boiling flow, the bubble-layer thickness model was introduced to avoid many covariances in cross-sectional averaged interfacial area transport equation in the subcooled boiling flow. The one-dimensional interfacial area transport equation in the subcooled boiling flow was formulated by partitioning a flow region into two regions; boiling twophase (bubble layer) region and liquid single-phase region. The bubble-layer thickness model assuming the square void peak in the bubble-layer region was developed to predict the bubble-layer thickness of the subcooled boiling flow. The obtained model was evaluated by void fraction profile measured in an internally heated annulus. It was shown that the bubble-layer thickness model could be applied to predict the bubble-layer thickness as well as the void fraction profile. In addition, the constitutive equation for the distribution parameter of the boiling flow in the internally heated annulus, which was used for formulating the bubble-layer thickness model, was developed based on the measured data. The model developed in this study will eventually be used for the development of reliable constitutive relations, which reflect the true transfer mechanisms in subcooled boiling flows.