Preparation and properties of dialdehyde carboxymethyl cellulose crosslinked gelatin edible films

Glycerol-plasticized gelatin edible films with a new kind of dialdehyde polysaccharide, dialdehyde carboxymethyl cellulose (DCMC) as crosslinking agent are successful prepared using casting techniques. The mechanical properties, thermal stability, light barrier properties, swelling behavior as well as water vapor permeability (WVP) of the gelatin–DCMC films are investigated. The results indicate that the addition of DCMC causes tensile strength (TS) and thermal stability to increase and elongation at break (EB) to decrease, suggesting the occurrence of crosslinking between gelatin and DCMC. The light barrier measurements present high values of transparency at 280 nm and low values of transparency at 600 nm of the gelatin–DCMC films, indicating that gelatin–DCMC films are very transparent (lower in transparency value) while they have excellent barrier properties against UV light. Moreover, the values of transparency at 280 nm increase with the increased DCMC and glycerol content, suggesting the potential preventive effect of gelatin–DCMC films on the retardation of product oxidation induced by UV light. Furthermore, the addition of DCMC can greatly decrease the water vapor permeability (WVP) and equilibrium swelling ratio (ESR) down to values about 1.5 × 10−10 g m/m2 s Pa and 150%, revealing the potential of DCMC in reducing the water sensitivity of gelatin-based films. In common for hygroscopic plasticizer in edible films, the addition of glycerol gives increase of EB and WVP and decrease of thermal stabilities and ESR of the gelatin–DCMC films.