The source of naturally occurring arsenic in a coastal sand aquifer of eastern Australia

The discovery of dissolved arsenic in a coastal aquifer used extensively for human consumption has led to widespread concern for its potential occurrence in other sandy coastal environments in eastern Australia. The development of an aquifer specific geomorphic model (herein) suggests that arsenic is regionally derived from erosion of arsenic-rich stibnite (Sb2S3) mineralisation present in the hinterland. Fluvial processes have transported the eroded material over time to deposit an aquifer lithology elevated in arsenic. Minor arsenic contribution to groundwater is derived from mineralised bedrock below the unconsolidated aquifer. An association with arsenic and pyrite has been observed in the aquifer in small discrete arsenian pyrite clusters rather than actual acid sulfate soil horizons. This association is likely to influence arsenic distribution in the aquifer, but is not the dominant control on arsenic occurrence. Arsenic association with marine clays is considered a function of their increased adsorptive capacity for arsenic and not solely on the influence of sea level inundation of the aquifer sediments during the Quaternary Period. These findings have implications for, but are not limited to, coastal aquifers. Rather, any aquifer containing sediments derived from mineralised provenances may be at risk of natural arsenic contamination. Groundwater resource surveys should thus incorporate a review of the aquifer source provenance when assessing the likely risk of natural arsenic occurrence in an aquifer.