Emission characteristics of polycyclic aromatic hydrocarbons from combustion of different residential coals in North China Original Research Article

Emission properties of polycyclic aromatic hydrocarbons (PAHs) from combustion of six residential coals in North China were investigated. The results indicated that, the total emission factors (EFs) for 15 PAH species in gaseous and particulate phases ranged from 52.8 to 1434.8 mg/kg with a decreasing sequence of local bituminous coals and anthracite coals, and honeycomb briquettes were largely dependent on the raw coals used to produce them. Particulate phase, dominated by median or high molecular weight components, made a major contribution (68.8% – 76.5%) to the total EFs for bituminous coals, while gaseous phase with principal low molecular weight species accounted for most (86.3% – 97.9%) of the total EFs for anthracite coals. The phase partitioning of PAH emission for honeycomb briquettes was similarly dependent on the crude coals. The total EFs, phase partitioning and component profiles of emitted PAHs were mainly influenced by the inner components of the studied coals. Burning mode and flue number on household coal-stoves also affected the emission characteristics by means of the oxygen supply. A sum of seven carcinogenic PAHs, benzo(a)pyrene(BaP)-equivalent carcinogenic power and total toxicity potency expressed in 2,3,7,8-tetrachlorodibenzo-dioxin(TCDD) toxic equivalence exhibited that bituminous coals and produced honeycomb briquettes had remarkably elevated values. Fluoranthene, benzo(b)fluoranthene, benzo(k)fluoranthene, chrysene and indeno(1,2,3-cd)pyrene from anthracite coals showed higher levels of BaP-based toxic equivalent factor, though the other toxicity indices were rather low for this type of coal.