Author/Authors :
S. Zuber، نويسنده , , V. Nehasil، نويسنده , , J. Pavluch )، نويسنده , , C. Robert، نويسنده , , B. Gruzza، نويسنده , , V. Matol´?n، نويسنده ,
Abstract :
Since the electron elastic reflection coefficient depends on the target atomic number, elastic peak electron spectroscopy
EPES.may be employed to monitor inhomogeneous thin films growth. In frame of this work, growth of gold on aluminium
and alumina was studied using an originally designed EPES spectrometer at various temperatures. To optimise the
experimental parameters, the elastically reflected electron current from a gold sample normalised to that one from an
aluminium sample was measured as a function of the incident energy. A maximum at the energy of 550 eV was found. It
corresponded to the result of an independent EPES measurement on gold carried out using another spectrometer. Then gold
was grown on aluminium and the elastically reflected electron current was followed. The signal intensity vs. deposition time
curve exhibited equidistant break points indicating the layer-by-layer growth mode. The saturation value was reached as
soon as three atomic layers of gold had been completed. This result is in a good agreement with a Monte Carlo simulation
confirming an excellent surface sensitivity of EPES. Final experiments were performed on gold grown on alumina. The
EPES signal intensities raised fractionally again. It proved the layer-by-layer growth mode of gold on alumina and
applicability of EPES to its investigation. q1999 Elsevier Science B.V. All rights reserved.