شماره ركورد كنفرانس :
3768
عنوان مقاله :
تحليل عددي پارامترهاي هيدروليكي جريان روي سرريزهاي نيلوفري با در نظر گرفتن مدل توربولانس
عنوان به زبان ديگر :
Nemerical analysis of hydraulic parameters on moorning spillways with consideration turbulent model
پديدآورندگان :
khosrojerdi Amir khosrojerdi@srbiau.ac.ir Science and Research University , Mosahebi Mohammadi Atefeh saye_khial3467@yahoo.com Science and Research University
تعداد صفحه :
9
كليدواژه :
مدل آشفتگي k-ε , سرريز نيلوفري , هيدروليك جريان , ناوير استوكس , شبيه سازي عددي , Ansys CFX , كاويتاسيون
سال انتشار :
1394
عنوان كنفرانس :
سومين كنفرانس ملي و اولين كنفرانس بين المللي پژوهش هاي كاربردي در مهندسي عمران، معماري و مديريت شهري
زبان مدرك :
فارسي
چكيده فارسي :
Of the goals of this research is to simulating the flow field on a spillway with actual dimensions, investigate various affecting factors, the efficiency of numerical method in the simulation of flow field, and the possibility of cavitation in evacuation system of Alborz Reservoir Dam. In this regard, flow hydraulic in the spillway is investigated using ANSYS CFX software, in which governing equations of fluid flow including equations of continuity and Navier-Stokes motion, are simulated by finite volume and implicit discretization at each time step. For this purpose, the free-surface two-phase flow by using k-ε turbulence model simulated to achieve the appropriate pattern of flow, and also flow parameters in different discharges are evaluated. Results has shown that flow depth and velocity changes is almost constant. Considering pressure in maximum discharge, negative pressure is observed, this caused cavitation possibility to be studied in the current research.
چكيده لاتين :
Of the goals of this research is to simulating the flow field on a spillway with actual dimensions, investigate various affecting factors, the efficiency of numerical method in the simulation of flow field, and the possibility of cavitation in evacuation system of Alborz Reservoir Dam. In this regard, flow hydraulic in the spillway is investigated using ANSYS CFX software, in which governing equations of fluid flow including equations of continuity and Navier-Stokes motion, are simulated by finite volume and implicit discretization at each time step. For this purpose, the free-surface two-phase flow by using k-ε turbulence model simulated to achieve the appropriate pattern of flow, and also flow parameters in different discharges are evaluated. Results has shown that flow depth and velocity changes is almost constant. Considering pressure in maximum discharge, negative pressure is observed, this caused cavitation possibility to be studied in the current research.
كشور :
ايران
لينک به اين مدرک :
بازگشت