شماره ركورد كنفرانس
3811
عنوان مقاله
Effect of silane-modified nanoclay on the wear behavior of a chopped strandmat-epoxy composite
عنوان به زبان ديگر
/
پديدآورندگان
Khosravi Hamed hkhosravi@eng.usb.ac.ir Assistant Professor, Department of Materials Engineering, Faculty of Engineering, University of Sistan and , Feiz Ali BSc Student, Department of Materials Engineering, Faculty of Engineering, University of Sistan and Baluchestan, Zahedan, Iran , Tohidlou Esmaeil Assistant Professor, Department of Materials Engineering, Faculty of Engineering, University of Sistan and Baluchestan, Zahedan, Iran
تعداد صفحه
9
كليدواژه
Fibrous composite , Nanoclay , Silanization , Wear rate , Coefficient of friction
سال انتشار
1396
عنوان كنفرانس
ششمين كنفرانس بين المللي مهندسي مواد و متالوژي و يازدهمين همايش ملي مشترك انجمن مهندسي متالوژي و مواد ايران و انجمن علمي ريخته گري ايران
زبان مدرك
فارسي
چكيده فارسي
The effect of silane-modified Na+-montmorillonite (S-MMT) nanoclay on the wear behavior of
E-glass chopped strand mat (CSM)/epoxy composite was investigated. The surface of Na+-MMT
was organically modified with 3-aminopropyltrimethoxy silane (3-APTMS). The modified
nanoclays were characterized by X-ray diffraction (XRD) analysis. Different weight percentages
of S-MMT (1-7 wt.% at a step of 2 wt.%) were dispersed in epoxy using mechanical stirring and
ultrasonication techniques. The S-MMT/epoxy nanocomposites were then used to manufacture
the multiscale composites using hand-layup route. The friction and wear behavior of composites
under dry sliding condition (distance of 1000 m) were investigated using a pin-on-disk wear
tester at 20 N normal load. The results showed that at filler content 5 wt.% of S-MMT, wear rate
and friction coefficient of fibrous composite were improved significantly. Furthermore, the
silanization of Na+-MMT reduced the wear rate and friction coefficient of final composite
compared to that specimen containing the same amount of unmodified Na+-MMT. In conclusion,
this study suggests that the addition of S-MMT nanoclay is a promising method to improve the
wear properties of the fibrous composite structures.
چكيده لاتين
/
كشور
ايران
لينک به اين مدرک