شماره ركورد كنفرانس
3961
عنوان مقاله
A CUBIC B-SPLINE APPROXIMATION METHOD FOR 3D SIMULATION OF ELECTROSPUN NANOFIBER JET
پديدآورندگان
Maghsoodlou Sh sh.maghsoodlou@gmail.com 1Textile Engineering Department, Faculty of Engineering, University of Guilan, P.O. Box 3756 , Noroozi B babak.noroozi@yahoo.com Textile Engineering Department, Faculty of Engineering, University of Guilan, P.O. Box 3756 , Haghi A. K Haghi@guilan.ac.ir Textile Engineering Department, Faculty of Engineering, University of Guilan, P.O. Box 3756
تعداد صفحه
8
كليدواژه
B , Spline approximation method , Electrospinning process , Reneker s model , Simulation improvement
سال انتشار
1395
عنوان كنفرانس
سومين همايش ملي تكنولوژي هاي نوين در شيمي، پتروشيمي و نانو ايران
زبان مدرك
انگليسي
چكيده فارسي
To optimize electrospinning process, the B-spline collocation methods and a new ODEs solver based on B-spline quasi-interpolation are developed. The problem consists of nonlinear ordinary differential equations. To solve the system of ODE, a 3D simulation obtained by applying quartic B-spline collocation method. To achieve this, the Reneker s model (i.e. bead-spring model) applied and the governing equations were numerically simulated by new ODEs solver without using perturbation equations in x and y directions. Most likely, this technique can represent the results the random perturbation. The results show that it could be possible to build mathematically a real-time simulation
كشور
ايران
لينک به اين مدرک