شماره ركورد كنفرانس :
4518
عنوان مقاله :
Modeling, Simulation and Optimization of Catalytic Naphtha Reforming Unit and Proposing a Model for RONC
Author/Authors :
Hamed Baniamerian Department of Chemical Engineering, Isfahan University of Technology, Isfahan , Arjomand Mehrabani Zeinabad
كليدواژه :
Catalytic Naphtha Reforming , Kermanshah Refinery , Research Octane Number , Modeling , Simulation , Catalyst Deactivation
عنوان كنفرانس :
The 7th International Chemical Engineering Congress & Exhibition (IChEC 2011
چكيده لاتين :
A model for Reseach Ocatane Number Clear (RONC) of catalytic naphtha reforming process has
been developed based on modeling of the naphtha reformers at Kermanshah refinery. The model
was created based on mass, and energy balances. Simulation is performed be solution of ordinary
differential equation in Matlab environment. The model not olny specifies the component
variations, but also considers catalyst deactivation. The impact of catalyst life, liquid hourly space
velocity, H2/HC ratio, end boiling point of feed, and weighted average inlet temperature, on the
RONC of product were investigated
