شماره ركورد كنفرانس :
4809
عنوان مقاله :
مروري بر مشخصات فني، رفتار و اصول طراحي ستون هاي سنگي غير مسلح و مسلح شده
عنوان به زبان ديگر :
A review of technical specifications,design principles and behavior of unarmed and armed stone columns.
پديدآورندگان :
باقرزاده خلخالي احد A-bagherzadeh@srbiau.ac.ir دانشگاه آزاد اسلامي واحد علوم و تحقيقات; , سلامي پرگو فرشاد Farshad.salami@srbiau.ac.ir دانشگاه آزاد اسلامي واحد علوم و تحقيقات;
كليدواژه :
ستون سنگي , بهسازي خاك , ژئوسنتتيك , ظرفيت باربري , طراحي ستون سنگي
عنوان كنفرانس :
ششمين كنفرانس ملي پژوهش هاي كاربردي در مهندسي عمران، معماري و مديريت شهري
چكيده فارسي :
استفاده از ستون هاي سنگي يك روش موثر براي بالا بردن ظرفيت باربري خاك هاي نرم مي باشد. اين ويژگي باعث افزايش علاقه و گسترش و بهبود اين روش شده است. احداث ستون سنگي يك روش بهسازي خاك براي افزايش ظرفيت باربري يا تقليل نشست خاك زير پي سازه مي باشد. استفاده از ستون هاي سنگي بمنظور اصلاح خواص خاكها به ويژه براي سازه هاي انعطاف پذير رو به افزايش است. ستون هاي سنگي ظرفيت باربري خود را از طريق فشار دور گير ناشي از خاك احاطه كننده اطراف ستون بدست مي آورند. وقتي ستون هاي سنگي در خاك هاي بسيار سست احداث مي شوند، فشار دورگير از طرف خاك مجاور ستون ها براي تامين عملكرد آنها كافي نمي باشد. در اينگونه خاك هاي سست براي ايجاد فشار دورگير جانبي مناسب مي توان از يك غلاف ژئوسنتتيك استفاده نمود. استفاده از ژئوگريد افقي نيز براي تقويت به عنوان پوشش براي ستون هاي سنگي، كارايي ستون هاي سنگي را به طور قابل ملاحظه اي افزايش مي دهد. بيشترين مقدار ظرفيت باربري زماني بدست آمده است كه ستون هاي سنگي همراه با مسلح كننده ژئوسنتتيك افقي و عمودي مورد استفاده قرار گرفته اند. هرگاه بمنظور بهسازي خاك در پروژه اي، استفاده از روش احداث ستون هاي سنگي مسلح يا غير مسلح مطرح باشد، يكي از مهمترين عوامل موثر در طراحي و استفاده از اين روش، محاسبه ظرفيت باربري ستون هاي سنگي است. اين تحقيق با تكيه بر مطالعات محققين مختلف، قصد انجام مروري بر رفتارهاي ستون هاي سنگي تسليح شده با ژئوسنتتيك و بدون حضور آنها و نيز معرفي اصول طراحي ستون هاي سنگي غير مسلح و مسلح شده را دارد.
چكيده لاتين :
The use of stone columns is an effective way to increase the bearing capacity of soft soils. This feature enhances interest and extends and improves this way. The construction of a stone pillar is a soil improvement method for increasing the bearing capacity or reducing the soil sink under the structure. The use of rock pillars to improve the properties of soils, especially for flexible structures, is increasing. Stone columns gain their bearing capacity through distant pressure due to the surrounding soil around the column. When stone columns are constructed in very loose soils, the pressure from the side of the adjacent columns is insufficient to ensure their performance. In these loose soils, a geosynthetic sheath can be used to create lateral oblique pressure. The use of horizontal geogrid also enhances the performance of stone columns considerably as reinforcement as a cover for stone columns. The greatest amount of bearing capacity is achieved when stone columns are used with horizontal and vertical geosynthetic arrays. Whenever, for the purpose of improving the soil in a project, the use of a method for the construction of armed or non-armed stone columns is considered, one of the most important factors in designing and using this method is to calculate the load capacity of stone columns. The research, based on studies by various researchers, intends to carry out a review of the behaviors of armed with geosynthetic stone columns and without their presence, as well as the introduction of principles for the design of unarmed and armed stone colums.