شماره ركورد كنفرانس :
5060
عنوان مقاله :
An Enhanced Maximum Power Point Tracking Based Finite-Control-Set Model Predictive Control for PV Systems
Author/Authors :
Mostafa ، Ahmed Institute for Electrical Drive Systems and Power Electronics - Technical University of Munich (TUM), Munich, Germany , Mohamed ، Abdelrahem Institute for Electrical Drive Systems and Power Electronics - Technical University of Munich (TUM), Munich, Germany , Ralph ، Kennel Institute for Electrical Drive Systems and Power Electronics - Technical University of Munich (TUM), Munich, Germany , Christoph ، M. Hackl Department of Electrical Engineering and Information Technology - University of Applied Sciences، Munich, Germany
كليدواژه :
PV system , PV module , FCS-MPC , Modeling and MPPT
عنوان كنفرانس :
11th Power Electronics, Drive Systems, and Technologies Conference (PEDSTC)
چكيده فارسي :
فاقد چكيده فارسي
چكيده لاتين :
This paper presents an enhanced maximum power point tracking (MPPT) technique based on the finite-control-set model predictive control (FCS-MPC) for PV systems. The system under study consists of a photovoltaic (PV) module and resistive load, while a boost converter is used as an interfacing circuit between the PV source and the load. To control the converter, a current-based cost function is used to obtain the optimal switching state. Further, the previous switching state is included in the cost function to enhance the MPPT performance. For investigation, the proposed method is compared with perturb and observe (P&O) method. Additionally, comparison between the proposed technique and the conventional FCS-MPC is performed at different atmospheric conditions.
