شماره ركورد كنفرانس :
5041
عنوان مقاله :
Surface Modification of Polyethersulfone (PES) Hollow Fiber Ultrafiltration Membranes
Author/Authors :
M. H. kopaei Department of chemical Engineering - Isfahan university of technology, Isfahan, Iran , A. Asadinezhad Department of chemical Engineering - Isfahan university of technology, Isfahan, Iran , M. Sadeghi Department of chemical Engineering - Isfahan university of technology, Isfahan, Iran
كليدواژه :
PES , hollow fiber , ultrafiltration , acrilic acid , hydrophilic surface , fouling
عنوان كنفرانس :
The 10th International Chemical Engineering Congress & Exhibition (IChEC 2018)
چكيده فارسي :
فاقد چكيده فارسي
چكيده لاتين :
Polyethersulfone hollow fiber ultrafiltration membrane has been modified by means of UVinitiated graft polymerization technique using the weakly acidic monomer acrylic acid and the immersion method. Different UV-irradiation times were studied. Both the unmodified and the modified polyethersulfone membranes were characterized by attenuated total reflection Fourier transform infrared spectra (FTIR-ATR) and dynamic contact angle (CA) analyses. Irreversible membrane fouling has been studied by using milk solution. It was observed that modified membranes exhibited higher permeance that the unmodified polyether sulfone ultrafiltration membrane.The obtained results indicate higher hydrophilicity of the surface modified membranes in comparison to the neat membrane and irreversible fouling by milk was reduced after UVinitiated graft polymerization by acrylic acid.
