شماره ركورد كنفرانس :
5265
عنوان مقاله :
ارزيابي تأثير ساختمان لايي بر افت تنش پارچههاي فيوز شده
عنوان به زبان ديگر :
Evaluation of the influence of interlining’s structure the stress relaxation of fused fabrics
پديدآورندگان :
جوادي شكيبا دانشگاه صنعتي اميركبير , موسي زادگان فاطمه f_mousazadegan@aut.ac.ir دانشگاه صنعتي اميركبير , اعزاز شهابي نازنين دانشگاه صنعتي اميركبير
كليدواژه :
افت تنش , عمليات فيوزينگ , پارچه فيوز شده , ساختمان لايي , جهت اعمال كرنش
عنوان كنفرانس :
سيزدهمين كنفرانس ملي مهندسي نساجي ايران
چكيده فارسي :
در اين مطالعه، تأثير نوع لايي بر رفتار افت تنش پارچه فيوز شده مورد توجه قرار گرفته است. به همين منظور از لايي هاي تاري پودي، حلقوي و بي بافت در محدوده وزن واحد سطح مشابه، براي انجام عمليات فيوزينگ بر روي يك پارچه تاري پودي استفاده شده است. در اين راستا، اندازه گيري و مطالعه رفتار كششي هر يك از لايي ها و پارچه، قبل و بعد از عمليات فيوزينگ، به منظور به دست آوردن اطلاعات مورد نياز براي انجام آزمايش افت تنش، صورت گرفته است. سپس رفتار افت تنش هر يك از لايي ها و پارچه نيز به تنهايي و همچنين پس از انجام عمليات فيوزينگ، بررسي شده است. نتايج به دست آمده از اين مطالعه بيانگر آن است كه در اثر انجام عمليات فيوزينگ، به سبب نفوذ رزي پن به درون پارچه، سختي ساختار فيوز شده افزايش مي يابد و اين فرآيند به صورت محسوسي بر رفتار كششي و افت تنش پارچه فيوز شده اثرگذار است و منجر به افزايش استحكام و كاهش افت تنش كششي مي شود.
چكيده لاتين :
In this project, the effect of interlining type on the stress relaxation behavior of fused fabric has been investigated. For this purpose, woven, knitted and nonwoven interlinings with the same areal weight range have been used to perform fusing operation on a woven fabric. In this regard, the tensile behavior of each of the interlinings and fabric was studied before and after the fusing operation, in order to obtain the information needed to carry out the stress relaxation test. Then, the stress relaxation behavior of each interlining and fabric was investigated before and also after the fusing process. The results obtained from this study indicate that due to the fusing operation, because of the penetration of resin into the fabric, the stiffness of the fused structure increased and this process significantly affected the tensile behavior and stress relaxation of the fused fabric. The fusing process leads to an increase in strength and a decrease in the tensile strain.