پديدآورندگان :
Asadi Zahra Polymerization Engineering Department, Iran Polymer and Petrochemical Institute (IPPI), P.O. Box 14965/115, Tehran, Iran , Sajadi Samahe 2Gas Conversion Department, Faculty of Petrochemicals, Iran Polymer and Petrochemical Institute, PO Box 14975-112, , Bahri-Laleh Naeimeh Polymerization Engineering Department, Iran Polymer and Petrochemical Institute (IPPI), P.O. Box 14965/115, Tehran, Iran , Nekoomanesh-Haghighi Mehdi Polymerization Engineering Department, Iran Polymer and Petrochemical Institute (IPPI), P.O. Box 14965/115, Tehran, Iran
كليدواژه :
Poly , alpha , olefin , Catalyst , Hydrogenation , HNT , Pd nanoparticles
چكيده فارسي :
Hydro-finishing is one of the important reasons to reach high quality of Poly-alpha-olefin oils, which can ultimately improve their oxidation resistance and give better oil transparency. Precious metals are common hydro-finishing catalysts that are placed on various supports. In this study, the heterogeneous hydrogenation catalysts were fabricated on three different mineral supports of alumina, silica, and Boehmite. The catalytic activity of all catalysts was investigated and compared. The 1HNMR results showed that Pd/Boehmite, with a hydrogenation efficiency of 82% has the best catalytic activity, and also by ICP results, the maximum loading of palladium nanoparticles about 1.15% was illustrated
